OD Range : As per standard Pipe schedule Non-standard wall thickness as per requirement also available.
Length : We have capability to hone 12 mtr long tubes/barrels.
Material : Standard Alloy steels like EN Grades, ASTMA Grades, St 52, E-355, etc. Non-ferrous metals like SS Grades, Brass, Aluminium, etc.
Special Steels : Low Temperature Steels, Steels with customised YS, TS & Impact parameters, Heat-Treated Steels, etc.
Surface Finish : ENP/NP. ID – Ra 0.4 µm or better as per requirement, with/without coatings like Hard-Chrome Plating/ENP.
OD – As per requirement
RM Reports : Certificate as per EN 10204 Type 3.1/NABL approved Lab Certificate/NDT Reports.
Dimensional Reports :
PDIR as per Customer format can be provided.
EMIPL PDIR is available for every tube.
TPI /Customer Inspection are welcome.
Special Features : Weldments if any can be manufactured & welded by us before the final honing operation for distortion-free bores. CNC facilities for tube end machining like counter-boring & threading
as per drawing available. Honed Tubes for telescopic cylinders i.e., with Hard-Chrome plated ID & OD available.
OD Range : As per standard Pipe schedule Non-standard wall thickness as per requirement also available.
Length : We have capability to hone 12 mtr long tubes/barrels.
Material : Standard Alloy steels like EN Grades, ASTMA Grades, St 52, E-355, etc. Non-ferrous metals like SS Grades, Brass, Aluminium, etc.
Special Steels : Low Temperature Steels, Steels with customised YS, TS & Impact parameters, Heat-Treated Steels, etc.
Surface Finish : ENP/NP. ID – Ra 0.4 µm or better as per requirement, with/without coatings like Hard-Chrome Plating/ENP.
OD – As per requirement
RM Reports : Certificate as per EN 10204 Type 3.1/NABL approved Lab Certificate/NDT Reports.
Dimensional Reports :
PDIR as per Customer format can be provided.
EMIPL PDIR is available for every tube.
TPI /Customer Inspection are welcome.
Special Features : Weldments if any can be manufactured & welded by us before the final honing operation for distortion-free bores. CNC facilities for tube end machining like counter-boring & threading
as per drawing available. Honed Tubes for telescopic cylinders i.e., with Hard-Chrome plated ID & OD available.